package tar-unix

v3.1.2 (2024-09-20)

• Fix a wrong assumption in Tar_lwt_unix.run for Tar.Really_read _ that one tar block was always read. This meant that using Tar.Really_read with a size different from 512 would fail. (Reported by @jonahbeckford, review by @hannesm, @reynir, #153)

• Document better the actual behavior of Tar_unix.extract and Tar_lwt_unix.extract (@reynir, #155)

v3.1.1 (2024-09-13)

• Expose Tar_lwt_unix.run as we do with Tar_unix.run and Tar_eio.run. This was an oversight in v3.0.0. (Reported by @jonahbeckford, @reynir, #150)

v3.0.0 (2024-08-05)

• Fix Header.marshal and the checksum and the length (@reynir, #145)

• Delete a mutable field about the level into the header (@hannesm, #141)

• BREAKING: de-functorize the package (@hannesm, @reynir, @dinosaure, #140, #143, #146)

  These PRs attempt to de-functorize Tar so that users can implement I/O themselves, using Tar's own element serialization/deserialization functions to take advantage of read/write methods. This avoids imposing on the user the implementation of a module that is too rigid in his/her case (which could have performance implications).

  Tar offers functions for serializing/deserializing tar-specific elements from string. It is then up to the user to know how to obtain or write these strings.

  To this, these PRs add "logics" (see 'a Tar.t) requiring read and/or write implementations and describing how to extract all entries from a tar file or how to write a tar file according to a "dispenser" (like Seq.to_dispenser) of entries.

  These logics do not depend on a particular "scheduler", and these PRs propose a derivation of these logics with tar-unix, tar-eio and tar-mirage. These latter derivations mean that the API for these packages has only been extended, and there are no breaking changes as such.

  These logics also make it easy to offer a compression/decompression layer with decompress, so you can easily manipulate and/or create a .tar.gz file.

v2.6.0 (2023-09-07)

• Add eio backend for tar in tar-eio (@patricoferris, review by @talex5, @reynir, #132)

• Also apply backwards compatibility fix when GNU LongName is used. The compatibility fix is unfortunately also applied for unknown-to-ocaml-tar link indicators (reported by @gravicappa in #129, @reynir, #133)

• tar: support pax Global Extended Headers. This adds state to tar parsing. (#119, #120, @MisterDA)

• Support GNU LongLink and LongName. Prior, Tar.HeaderWriter and Tar.HeaderReader supported both, but Tar.Header.Link only had LongLink and (de)serialized to (from) GNU LongName (#127)

• Compatibility level when reading / parsing is removed. Only GNU LongLink/LongName extensions were affected by the compatibility level when reading (#127)

• Add module types Tar.HEADERREADER and Tar.HEADERWRITER describing the output of Tar.HeaderReader and Tar.HeaderWriter respectively (#127)

• Types Tar.READER.t and Tar.WRITER.t are renamed to io (#127)

• Add write_global function for writing a global PAX extended header (#127)

• Rework IO-specific modules (tar-unix etc.) harmonizing them (#127)

• Avoid exceptions in tar and use result instead. The exceptions End_of_stream and Checksum_mismatch are removed (#127)

• Remove the Tar_cstruct module as it was unused (#127)

• Remove debug printers (#127)

• Finally remove the unused camlp-streams dependency (#127)

v2.5.1 (2023-06-20)

• Treat headers with link indicator '0' or '\000' (Normal) as directories for backward compatibility (reported in #129, fix by @reynir)

v2.5.0 (2023-06-06)

• File names and link names are used from PAX headers when parsing (reported by @gravicappa, fixed in #128 by @reynir)

v2.4.0 (2023-03-30)

• Switch to alcotest for tests (@MisterDA, review by @reynir, #121)

• BREAKING: fix ustar magic version. Previously, the version "0\000" was serialized instead of the correct version "00". This means tar archives may not be reproducable with older versions. (@reynir, @hannesm, #117 and #122)

• Remove ppx_cstructdependency (@hannesm, review by @reynir, #117)

• Properly skip Pax GlobalExtendedHeaders (@MisterDA, @reynir, #116 and #118)

v2.3.0 (2023-02-09)

• tar-mirage: implement mirage-kv.6.0.0 (@reynir, @hannesm)

v2.2.2 (2022-12-12)

• tar-mirage: fix writing of data when data+tar header is a multiple of sector_size greater than 1 (@reynir, review by @hannesm, #100)

v2.2.1 (2022-10-28)

• tar-mirage: fix writing of data, previously the end_of_archive was set 512 bytes short (#99 @hannesm @reynir)

v2.2.0 (2022-10-19)

• tar-mirage requires and implements mirage-kv.5.0.0 (@hannesm, #96)

• tar-mirage implements Mirage_kv.RW (append-only) (@hannesm, @reynir, @dinosaure, review by @MisterDA, #93)

• Update usage of cstruct in tar: unnecessary memsets removed, use Cstruct.of_string (@hannesm, #93)

• Fix tar-mirage read buffer allocation error (@reynir, review by @hannesm, #94)

• tar and tar-mirage do not require re anymore, tar-mirage doesn't depend on iopage and works with solo5 and other improvements (@hannesm, review by @reynir, #90)

v2.1.0 (2022-08-31)

• tar-mirage requires mirage-block.2.0.0 (@kit-ty-kate, #86)

• Remove io-page-unix dependency (@hannesm, #87)

• Add GZip support (@dinosaure, #88)

v2.0.1 (2022-03-09)

• Set O_CLOEXEC on opened files and be sure to close opened files (@MisterDA, @talex5, #83)

• OCaml 5.00 support (add a new dependecy camlp-stream) (@Sudha247, #84)

• Missing padding in LongLing 'L' case (@dra27, #82)

v2.0.0 (2021-09-23)

• Bump lower-bound on Cstruct to 6.0.0 (@MisterDA, @djs55, @dinosaure, #74)

• Update to Dune 2.9 and generate opam files (@MisterDA, @djs55, @dinosaure, #74)

• Support only OCaml versions 4.08 and higher. (@MisterDA, @dinosaure, #77)

• Don't print any logging to stdout or stderr (@MisterDA, @djs55, @dinosaure, #74)

• Remove Tar.Make.Header, Tar_cstruct.Header, Tar_unix.Header, and Tar_lwt_unix.Header to keep only Tar.Header and use it everywhere.

  • Tar.Make.Header.get_next_header becomes Tar.Make.get_next_header;

  • Tar_cstruct.Header.get_next_header becomes Tar_cstruct.get_next_header;

  • Tar_lwt_unix.Header.get_next_header becomes Tar_lwt_unix.get_next_header;

  • Tar_lwt_unix.Header.of_file becomes Tar_lwt_unix.header_of_file;

  • Tar_unix.Header.get_next_header becomes Tar_unix.get_next_header;

  • Tar_unix.Header.of_file becomes Tar_unix.header_of_file;

  • All the Tar_*.Header.t values have to be changed to Tar.Header.t. (@MisterDA, @dinosaure, #77)

• Fix parsing of pax Extended Header File Times with sub-second granularity. (@MisterDA, @dinosaure, #77)

• Add Tar_unix.transform and Tar_lwt_unix.transform to help transforming headers of a streamed tar archive between two file descriptors. (@MisterDA, @dinosaure, #77)

• Remove {build} tag on the dune dependency (@CraigFe, @hannesm, #72)

• Adapt ocaml-tar to newer MirageOS interfaces (@hannesm, @dinosaure, #73)

• Update gnu.org link (@reynir, @dinosaure, #79)

• file_mode defaults to 0o400 (@reynir, @MisterDA, @dinosaure, #78)

v1.1.0 (2019-04-08)

• Do not depend on mirage-types, use mirage-kv instead (@hannesm)

• Support mirage-kv 2.0.0 (@hannesm)

• Do not suppress "unused value" warning (@emillon)

• Represent link indicator as a char. This transforms comments into actual code (@emillon)

v1.0.1 (2019-02-04)

• fix tar-unix build with modern cstruct.lwt (@avsm)

v1.0.0 (2019-02-03)

• port build to dune from builder (@avsm)

• upgrade opam metadata to 2.0 (@avsm)

• remove topkg in favour of dune-release (@avsm)

• use modern ppx_cstruct instead of cstruct.ppx (#65 @avsm @djs55)

• test with OCaml 4.07 as well (@avsm)

v0.9.0 (2017-11-25)

• preliminary support for Cstruct.t-backed tar processing (#54 by @hcarty)

• fix build with OCaml 4.06.0 (and -safe-string)

v0.8.0 (2017-05-09)

• split into 3 packages: tar, tar-unix, tar-mirage

• use jbuilder for building

• add support for reading @LongLink headers

• mark deprecated functions with @@ocaml.deprecated

• fix some warnings

v0.7.1 (2017-02-03)

• convert build system to topkg (#43, @hannesm)

v0.7.0 (2017-01-19)

• Build against MirageOS version 3, and drop support for earlier versions.

• Support only OCaml versions 4.03 and higher.

v0.6.1 (2016-09-30)

• fix a bug in the key=value interface when the archive isn't a multiple of 4KiB in size

v0.6.0 (2016-09-19)

• support for pax headers

• removed Tar.Archive.fold: please use HeaderReader instead

v0.5.1 (2016-08-30)

• handle EINTR and short writes properly (@ivg)

• avoid a warning catching Failure exceptions from int_of_string

v0.5.0 (2016-04-24)

• now requires cstruct >= 1.9.0 and OCaml 4.02+

v0.4.2 (2016-04-22)

• test: only run tests if mirage-block-unix is present

• improve the opam file

• travis: simplify the configuration

v0.4.1 (2015-07-21)

• fix Tar_mirage when using block devices with < 4096 byte sectors

v0.4.0 (2015-07-19)

• add tar.mirage in ocamlfind, containing Tar_mirage which exposes a BLOCK device as a KV_RO

v0.3.0 (2015-04-06)

• add Tar.Make functor which allows easier integration with camlzip

• always initialise tar header unused bytes to 0 (previously would use uninitialised data)

• modernise Travis CI scripts to use OPAM 1.2 workflow.

v0.2.1 (2013-11-15)

• Re-add some old deprecated functions

v0.2.0 (2013-10-13)

• Add 'Tar.Archive.fold' for folding over entries in an archive

v0.1.1 (2013-10-03)

• Rename ocamlfind package from 'ocaml-tar' to simply 'tar'

v0.1.0 (2013-10-03)

• Initial release